Magnetic Particle Testing (MPT)

Magnetic Particle Testing (MPT), also referred to as Magnetic Particle Inspection, is a nondestructive examination (NDE) technique used to detect surface and slightly subsurface flaws in most ferromagnetic materials such as iron, nickel, and cobalt, and some of their alloys. Because it does not necessitate the degree of surface preparation required by other nondestructive test methods, conducting MPT is relatively fast and easy. This has made it one of the more commonly utilized NDE techniques.

FREE RESOURCE: Click here to download a detailed overview of Magnetic Particle Testing.

MPT is a fairly simple process with two variations: Wet Magnetic Particle Testing (WMPT) and Dry Magnetic Particle Testing (DMPT). In either one, the process begins by running a magnetic current through the component. Any cracks or defects in the material will interrupt the flow of current and will cause magnetism to spread out from them. This will create a “flux leakage field” at the site of the damage.

The second step involves spreading metal particles over the component. If there are any flaws on or near the surface, the flux leakage field will draw the particles to the damage site. This provides a visible indication of the approximate size and shape of the flaw.

There are several benefits of MPT compared to other NDE methods. It is highly portable, generally inexpensive, and does not need a stringent pre-cleaning operation. MPT is also one of the best options for detecting fine, shallow surface cracks. It is fast, easy, and will work through thin coatings. Finally, there are few limitations regarding the size/shape of test specimens.

Despite its strengths, the method is not without its limits. The material must be ferromagnetic. Likewise, the orientation and strength of the magnetic field is critical. The method only detects surface and near-to-surface defects. Those further down require alternative methods. Large currents are sometimes required to perform this method, thus “burning” of test parts is sometimes possible. In addition, once MPT has been completed, the component must be demagnetized, which can sometimes be difficult.

Watch Video:

Comments

Ultrasonic pulse velocity test for concrete

Introduction An ultrasonic pulse velocity (UPV) test is an in-situ , nondestructive test to check the quality of concrete and natural rocks. In this test, the strength and quality of concrete or rock is assessed by measuring the velocity of an ultrasonic pulse passing through a concrete structure or natural rock formation. Ultrasonic Pulse Velocity (U.P.V) This test is conducted by passing a pulse of ultrasonic through concrete to be tested and measuring the time taken by pulse to get through the structure. Higher velocities indicate good quality and continuity of the material, while slower velocities may indicate concrete with many cracks or voids Ultrasonic testing equipment includes a pulse generation circuit, consisting of electronic circuit for generating pulses and a transducer for transforming electronic pulse into mechanical pulse having an oscillation frequency in range of 40 kHz to 50 kHz, and a pulse rece...

What is the rebound hammer test? Object, Principle, Apparatus, Procedure, Influence and Interpretation of results

Importance and Rebound Hammer Test : It is often necessary to test concrete structures after the concrete has hardened to determine whether the structure is suitable for its proposed structure. Such testing should ideally be done without damaging the structure, which is called a Non-destructive Test on concrete. Rebound Hammer is one of the methods of testing for the strength of concrete . Rebound hammer is used for checking the compressive strength of concrete (as per IS-13311(Part-2)/92 ) at a certain age of concrete. Rebound Hammer Test The object of the test : i) assessing the likely compressive strength of concrete with the help of suitable correlations between rebound index and compressive strength, ii) assessing the uniformity of concrete, iii) assessing the quality of the concrete in relation to standard requirements, and iv) assessing the quality of one element of concrete in relation to another. NOTE - The rebound hammer method can be used with greater confidence...

Profometer Test ( Rebar Locator Test ) | Lab Test Procedure | Applications, Advantages and Disadvantages

Non-destructive tests on concrete can be understood as the type of test on concrete structures that are employed to measure the strength of the concrete without actually destroying the structure. The primary objective of such a test is to evaluate the strength and durability of the existing concrete structure as well as for the identification of cracks and defects. One such type of non-destructive test on concrete structures is the Profometer test. ** Fast and accurate rebar detection , cover and diameter size measurement Profometer test can be defined as the non-destructive test conducted on the concrete structures to determine the size and location of the reinforcements and concrete cover rapidly and efficiently. This test is also commonly known as the rebar locator test. The instrument used to conduct this test is known as profometer or rebar locator. The rebar locator test is the fastest and the easiest method of detecting the reinforcement bars in concrete. The ...

RCC Pile

Search This Blog